YukonDAD 2853

Year of manufacture 2013; machine number 2853

YukonDA is a spray cleaning system for continuous material flow which is adapted to customer requirements. The parts pass through the successive treatment zones continuously (synchronised if required). Cleaning is carried out by guiding the parts past the fixed nozzle systems. In this case, the system was used for the high cleanliness requirements of the hardening industry, reliably guaranteeing error-free process results.

Basic system
Cleaning system spray cleaning with flat spray nozzles
Operating principle pass-through process for continuous cleaning of components

YukonDAD 2853 System accessories

  • Housing and pipes made of stainless steel 1.4301
  • Cleaning zone with media tank underneath
  • Electrically heated blow-out zone
  • Maintenance hatch in the tank area
  • Housing insulation with a stainless steel cover
  • Circulation pump with carbide face seal
  • Safety shut-off for heating and pump
  • Steam extraction fan
  • Continuous nozzle frame with spraying system
  • Flat brass nozzles
  • Removable basket filter for coarse soiling
  • Control cabinet with indicator lights and controls
  • Simatic S7-300 controller with OP 77 A control unit, for individual washing time programming, menu-based operation (in German)
  • Operating hours counter
  • 7-day timer
  • System labeling in German and English
  • System design as per DIN EN 12921, Machinery Directive 2006/42 EC, accident prevention regulations and the state of the art
  • Stainless steel floor drip pan
  • 100 µm simplex filter as Topline bag filter
  • Filter inserts
  • Plate phase separator 500 for oil separation, rinsing
  • Cleaning agent dosing with proportional dosing device
  • Manual roller conveyor
  • Replacement fan