Reinigunganlage Pacific von BvL im Instandhaltungswerk zur Reinigung von Radsätzen


Cleaning solutions for persistent layers

After years of intensive use of the trains, the wheelsets end up with massive soiling such as hard encrustations, grease, brake dust, etc. It is often also necessary to remove old, sometimes multiple paint layers to allow crack testing or repainting.

Another challenge when cleaning wheelsets is the high weight of up to several tons. In addition, drive wheelsets and running wheelsets have to be treated differently.

To meet the cleaning requirements, a large-parts system with sufficient space and adapted technology is required, e.g. our PacificER/TA and our Geyser.


PacificER is a large-volume spray cleaning system. The wheelsets rotate and are cleaned with a nozzle system that is adapted to the contour. The floor-level loading is automated. The PacificTA is equipped with a special nozzle frame for targeted cleaning of hard-to-reach places on different wheelsets.

The Geyser uses a robot system and the force of the high-pressure water jet for cleaning and paint stripping. Depending on level of soiling, cleanliness requirements and paint layers, the pressure ranges from 100 to 3,000 bar.

    Advantages PacificTA/ER:

  • Automatic feeding and discharge
  • Individual adaptation of the nozzles to the wheelset
  • Continuous feeding
  • Advantages Geyser:

  • Maximum movement flexibility and precision through robot technology
  • No thermal or mechanical strain on the surface
  • Optionally changeable tools, lances and nozzles

Application examples:

Highest precision and reliability in wheelset cleaning with the PacificDTA

A special nozzle system is used to direct water evenly onto the components. This allows reliable cleaning of hard-to-reach locations on different wheelsets. A camera system on the operating panel allows safe one-sided operation of the continuous cycle system.

Radsatz in Reinigungsanlage mit Spezial-Düsensystem

Paint stripping on wheelsets

The Geyser removes paint, rust and other substantial contamination from wheelsets with a high-pressure water jet of up to 3,000 bar, environmentally friendly and thoroughly. Different water tools can be used with the guiding robot as required.

Got any questions?